1 map80 series power-one s map80 series of power supplies provides reliable, tightly regulated dc power for commercial and industrial systems which require high peak current capabilities. wide-range ac input and full international safety, emi, and esd compliance ensure world-wide acceptance. all units bear the ce mark. the map80 utilizes a variable frequency design with a thermally efficient u-channel chassis to provide full power operation in convection cooled applications. design innovations include metric and sae mounting inserts on each mounting surface to provide integration flexibility. dual-mode connectors provide traditional terminal block connections or popular single row molex connector mating. single output models feature wide-range output adjustability to meet a wide variety of standard and user specific output voltage requirements. features wide range input for 110/220 vac applications ce marked to low voltage directive input transient & esd compliance to en61000-4-2/-3/-4 meets en55022, class b limits ttl compatible power fail signal compact footprint: 7.20" x 4.20" x 1.80" (182.9mm x 106.7mm x 45.7mm) greater than 175,000 hours mtbf metric and sae mounting inserts single output model selection chart model output adjustment maximum output peak output line load ripple & noise initial setting voltage range current current (note 3) regulation regulation %p-p (note 1) accuracy map80-1005 5v 4.5v to 5.6v 16a 18a 0.2% 1% 1.4% 5.0v to 5.1v map80-1012 12v/15v 11.5v to 15.5v 7.5/6a (note 2) 9.2/7.3a (note 2) 0.2% ?% 1% 11.76v to 12.15v map80-1024 24v/28v 23.0v to 29.0v 3.8/3.2a (note 2) 4.6/3.9a (note 2) 0.1% 0.5% 0.5% 23.8v to 24.2v notes: 1) maximum peak to peak noise expressed as a percentage of output voltage, 20mhz bandwidth. 2) map80-1012 output currents are expressed as 12v/15v operation. map80-1024 output currents are expressed as 24v/28v operatio n. 3) peak load for 60 seconds or less are acceptable, 10% duty cycle, maximum. multiple output model selection chart ? 80w continuous output power model output adjustment output peak output line load ripple & noise initial setting voltage range current current (note 1) regulation regulation %p-p (note 2) accuracy +5v 4.8v to 5.5v 14a 16a 0.2% 1% 1% 5.1v to 5.2v MAP80-4000 +12v 11.52v to 12.48v 4a 7a 0.2% 1% 1% 11.9v to 12.1v -5v fixed 1a 1a 0.5% 2% 1% -4.8v to -5.4v -12v fixed 1a 1a 0.5% 2% 1% -11.5v to -12.5v +5v 4.8v to 5.5v 14a 16a 0.2% 1% 1% 5.1v to 5.2v map80-4001 +24v 23.04v to 24.96v 2a 3.5a 0.2% 1% 1% 24.0v to 24.1v -12v fixed 1a 1a 0.5% 2% 1% -11.5v to -12.5v +12v fixed 1a 1a 0.5% 2% 1% 11.5v to 12.5v +5v 4.7v to 5.5v 14a 16a 0.2% 1% 1% 5.1v to 5.2v map80-4002 +12v 11.52v to 12.48v 4a 7a 0.2% 1% 1% 12.0v to 12.1v -12v fixed 1a 1a 0.5% 2% 1% -11.6v to -12.4v +12v fixed 1a 1a 0.5% 2% 1% 11.6v to 12.4v +5v 4.8v to 5.5v 14a 16a 0.2% 1% 1% 5.1v to 5.2v map80-4003 +15v 14.40v to 15.60v 3.5a 6a 0.2% 1% 1% 14.6v to 15.1v -5v fixed 1a 1a 0.5% 2% 1% -4.8v to -5.4v -15v fixed 1a 1a 0.5% 2% 1% -14.4v to -15.5v +5v 4.8v to 5.5v 14a 16a 0.2% 1% 1% 5.1v to 5.2v map80-4004 +24v 23.04v to 24.96v 2a 3.5a 0.2% 1% 1% 24.0v to 24.1v -15v fixed 1a 1a 0.5% 2% 1% -14.4v to -15.5v +15v fixed 1a 1a 0.5% 2% 1% 14.4v to 15.5v rev. 04/2000
2 map80 series multiple output model selection chart (cont.) ? 80w continuous output power model output adjustment output peak output line load ripple & noise initial setting voltage range current current (note 1) regulation regulation %p-p (note 2) accuracy +5v 4.8v to 5.5v 14a 16a 0.2% 1% 1% 5.1v to 5.2v map80-4010 +12v 11.52v to 12.48v 4a 7a 0.2% 1% 1% 12.0v to 12.1v -5v fixed 1a 1a 0.5% 2% 1% -4.8v to -5.4v -12v fixed 3a 3a 0.5% 2% 1% -11.5v to -12.5v +5v 4.8v to 5.5v 14a 16a 0.2% 1% 1% 5.1v to 5.2v map80-4020 +12v 11.52v to 12.48v 4a 7a 0.2% 1% 1% 12.0v to 12.1v -12v fixed 1a 1a 0.5% 2% 1% -11.5v to -12.5v -5v fixed 3a 3a 0.5% 2% 1% -4.8v to -5.4v notes: 1) peak loads up to 90 watts for 60 seconds or less are acceptable, (10% duty cycle max.). peak power must not exceed 90 watts. 2) maximum peak to peak noise expressed as a percentage of output voltage, 20mhz bandwidth. input specifications parameter conditions/description min nom max units input voltage - ac continuous input range. 90 135 vac 175 264 input frequency ac input. 47 63 hz brown out protection lowest ac input voltage that regulation is maintained with full rated loads. 90 vac hold-up time nominal ac input voltage (115vac), full rated load. 20 ms input current 90 vac (80w load). 2.5 a rms 110vac (80w load). 2.8 input protection non-user serviceable internally located ac input line fuse. inrush surge current internally limited by thermistor. vin = 264vac (one cycle). 25 c. 45 a pk operating frequency switching frequency of power supply (varies with load). 22 120 khz output specifications parameter conditions/description min nom max units efficiency full load, 115vac. varies with distribution of loads among outputs. 73 75 80 % minimum loads map80-1012 0.42 map80-1024 0.21 amps map80-1005 and all multiple output models, main channel only. 1.00 ripple and noise full load, 20mhz bandwidth. see model selection chart. output power continuous output power, all multiple output models. 80 watts peak output power (60s maximum, 10% duty cycle), all multiple output models. 90 watts overshoot / undershoot output voltage overshoot/undershoot at turn-on, v1, v2. 1 % regulation varies by output. total regulation includes: line changes from 90-132 vac see model selection chart. or 175-264, changes in load starting at 20% load and changing to 100% load. transient response recovery time, to within 1% of initial set point due to a 50-100% 500 ? load change, 4% max. deviation. (main output of multiple output units). turn-on delay time required for initial output voltage stabilization. 1 5 sec turn-on rise time time required for output voltage to rise from 10% to 90%. 20 ms interface signals and internal protection parameter conditions/description min nom max units overvoltage provided on map80-1005 and the main output of multiple output units. 5.5 6.8 protection map80-1012 17 23 v map80-1024 32 37 overload protection fully protected against output overload and short circuit. automatic recovery upon removal of overload cond ition. power fail ttl compatible logic signal. time before regulation dropout warning (note 1) due to loss of input power at 110vac. 4 ms notes: 1) power fail warning is not available on map80-1024. the map80-1012 is an open collector output, capable of sinking 35 ma, ma ximum. nuclear and medical applications power-one products are not authorized for use as critical components in life support systems , equipment used in hazardous environments, or nuclear control systems without the express written consent of the president of power-one, inc. technical revisions the appearance of products, including safety agency certifications pictured on labels, may change dependin g on the date manufactured. specifications are subject to change without notice.
3 map80 series safety, regulatory, and emi specifications parameter conditions/description min nom max units agency approvals ul1950. csa 22.2 no. 234/950. approved en60950 (tuv). dielectric withstand input to output. 2600 vdc voltage electromagnetic fcc cfr title 47 part 15 sub-part b - conducted & radiated. b interference, en55022 / cispr 22 conducted. b class conducted en55022 / cispr 22 radiated. b input transient en61000-4-5 level 3. line to line 1 kv protection line to ground 2 insulation resistance input to output. 7 m ? leakage current per en60950, 264vac. 500 a environmental specifications parameter conditions/description min nom max units altitude operating. 10k asl ft. non-operating. 40k asl ft. operating temperature derate linearly above 50? by 2.5% per ? at 100% load: 0 50 ? to a maximum temperature of 70?. at 50% load: 0 70 ? storage temperature -55 85 c temperature coefficient 0? to 70? (after 15 minute warm-up). ?.02 ?.03 %/? relative humidity non-condensing. 5 95 %rh shock operating, peak acceleration. 20 g vibration random vibration, 10hz to 2khz, 3 axis. 6 g rms options description notes size impact cover add ??suffix to model number or order part number 412-59585 separately. 7.20" x 4.20" x 2.05" for convection cooled applications, derate output power to 65 watts on all multiple (183.0mm x 107.0mm x 52.0mm) output models and map80-1005. derate map80-1012 and map80-1024 to 75 watts. www.power-one.com www.power-one.com for the most up-to-date information 24 hours/day? days/week
4 map80 series overall size: 7.20" x 4.20" x 1.80" (182.9mm x 106.7mm x 45.7mm) weight: 1.8 lbs (0.82 kg) input & output connections: 6-32 screw wire clamps on 0.312" (7.9mm) centers, 0.045" (1.1mm) square pins on 0.156" (3.9mm) centers, mates with molex series 2139, 6442, or 41695 power fail connections: j1: 0.035" (0.9mm) square pins on 0.100" (2.5mm) centers, mates with molex series 2695/6471 chassis: 0.090" (2.3mm) aluminum alloy, with clear finish 1 1 tb1 v2 v. adj. 3 tb2 7 v1 v. adj. f1 j1 pf com dc output (mates with 14 circuit molex connector) ac input (mates with 5 circuit molex connector) universal mounting insert (8 places) tb1 gnd n l tb2 pin 1 pin 1 v1 com v3 v4 v2 v1 0 .51" (13. 0mm) 0. 485" (12.3mm) 6 .70" (170.2mm) 1 .80" (45.7mm) 0 .25" (6.4mm) 0.79" (20.0mm) 1.02" (25.8mm) 2.626" (66.70mm) 2 .170" (55.1mm) 7. 7.20" (182.9mm) 3 3.230" (82.0mm) 4.20" (106.7mm) 1.04" (26.4mm) 0.81" (20.6mm) 6-32 unc 2b thread m4 x 0.7 6h thread 0.17" (4.3mm) d ia t hru
|
